Vacuum Dewatering System and Groove Cutting Machine - Atlas

A vacuum dewatering system or VDS is a set of four machines that are used to get a nice and hard concrete floor. The four equipment that helps in the dewatering process are a double beam screed vibrator, vacuum pump, power floater cum trowel, and groove cutter. A Vacuum Pump is used to suck all the air bubbles that may have trapped during the laying of the concrete. It allows the cement to come up to upper layers and hence gives superior strength to the floor. The three mats: filter mat, suction mat, and top mat, these mates do not allow the cement to come up but only sucks the extra water. The top mat size is 4.5 m x 5.5 m. During working, it eludes a vacuum pressure of 450-500 mm/Hg. The maximum pump pressure which can be developed is 650 mm/Hg. It is powered by a 5 HP / 7.5 HP motor.

Address: Plot No. 317/1, GIDC, Phase -II, Dediyasan, Mehsana, Gujarat 384002

Like us on Facebook!